What is Anubis Chain? A Beginner’s Step-by-Step Guide to Creating a Token

Anubis Chain is a high-throughput, ultra-low-fee Layer-1 blockchain that is fully compatible with the Ethereum Virtual Machine (EVM). It is an ideal playground for developers and beginners to mint their own crypto assets with almost zero cost.
Creating a token on Anubis Chain is essentially deploying a standard ERC-20 smart contract. All you need is a crypto wallet, a tiny amount of the native coin for gas, and an online tool called Remix IDE—no deep coding knowledge required. This guide will walk you through the entire process from scratch, compare it to major chains, and answer your most pressing questions.

1. What is Anubis Chain and Why Use it for Token Creation?

Anubis Chain positions itself as the "next-generation infrastructure for decentralized applications." It uses a Proof-of-Stake (PoS) combined with Practical Byzantine Fault Tolerance (PBFT) consensus mechanism, delivering both a high degree of decentralization and extreme performance. Because it is fully EVM-compatible, all Ethereum developer tools (like MetaMask, Remix, Truffle, Hardhat), token standards (ERC-20, ERC-721), and dApps can be ported over to Anubis Chain seamlessly.

For a beginner, the three biggest concerns about creating a token are low cost, high speed, and simplicity. Anubis Chain delivers on all three:

• Gas fees are less than $0.001, so deploying a token contract costs practically nothing.

• Block time is 3 seconds, meaning transactions are confirmed almost instantly.

• Full ERC-20 compatibility allows you to use any standard token contract found online without modification.

The data table below provides a clear, at-a-glance comparison of the token creation experience on Anubis Chain versus other popular blockchains.

Data Comparison: Anubis Chain vs. Ethereum vs. BSC vs. Polygon

The Takeaway: Anubis Chain combines full EVM compatibility with near-zero costs and performance that dwarfs Ethereum’s mainnet. It’s perfect for practice runs, community token launches, and bootstrapping small to medium-sized projects.

2. Pre-Launch Setup: Wallet and Test Tokens

2.1 Install and Configure MetaMask

MetaMask is the essential browser extension wallet for interacting with Anubis Chain.

1. Go to metamask.io and install the extension.

2. Create a new wallet or import an existing one. Crucially, write down your Secret Recovery Phrase on paper and store it offline.

2.2 Add the Anubis Chain Network

Open MetaMask, go to Settings > Networks > Add Network, and enter the following details (these are examples for the Mainnet; see the FAQ for Testnet info):

• Network Name: Anubis Chain Mainnet

• RPC URL: https://rpc.anubis.network

• Chain ID: 9999 (example, always verify with official docs)

• Currency Symbol: ANB

• Block Explorer URL: https://explorer.anubis.network

After saving, your wallet can connect to the Anubis Chain mainnet and display your ANB balance.

2.3 Get ANB Tokens for Gas Fees

You need a small amount of ANB in your wallet to pay for deploying the contract. Here’s how to get it:

• Buy ANB on a centralized exchange and withdraw it to your wallet address.

• Use the official bridge to swap assets from another chain to ANB.

• For the testnet, you can get free tokens from a "faucet" (covered in the FAQ).

Pro Tip for Beginners: Always practice on the testnet first. You can master the entire process at zero cost before moving to the mainnet.

3. Writing the ERC-20 Token Contract

Anubis Chain is fully compatible with the Ethereum ERC-20 standard, meaning you can use the standard contract below. You only need to change the token’s name, symbol, decimals, and initial supply.

3.1 The Standard ERC-20 Contract Code

// SPDX-License-Identifier: MITpragma solidity ^0.8.0;contract MyToken {
    string public name = "My First Token";   // Token full name
    string public symbol = "MFT";            // Token ticker
    uint8 public decimals = 18;              // Typically 18
    uint256 public totalSupply;              // Total supply

    mapping(address => uint256) public balanceOf;
    mapping(address => mapping(address => uint256)) public allowance;

    event Transfer(address indexed from, address indexed to, uint256 value);
    event Approval(address indexed owner, address indexed spender, uint256 value);

    constructor(uint256 _initialSupply) {
        totalSupply = _initialSupply * 10 ** decimals; // Critical unit conversion
        balanceOf[msg.sender] = totalSupply;
        emit Transfer(address(0), msg.sender, totalSupply);
    }

    function transfer(address _to, uint256 _value) public returns (bool success) {
        require(balanceOf[msg.sender] >= _value, "Insufficient balance");
        balanceOf[msg.sender] -= _value;
        balanceOf[_to] += _value;
        emit Transfer(msg.sender, _to, _value);
        return true;
    }

    function approve(address _spender, uint256 _value) public returns (bool success) {
        allowance[msg.sender][_spender] = _value;
        emit Approval(msg.sender, _spender, _value);
        return true;
    }

    function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
        require(balanceOf[_from] >= _value, "Insufficient balance");
        require(allowance[_from][msg.sender] >= _value, "Allowance exceeded");
        balanceOf[_from] -= _value;
        balanceOf[_to] += _value;
        allowance[_from][msg.sender] -= _value;
        emit Transfer(_from, _to, _value);
        return true;
    }}

How it works: In the constructor, _initialSupply is the number of tokens you want to mint (e.g., entering 1000000 means 1 million). With decimals = 18, the actual on-chain supply becomes 1000000 * 10^18 base units. All minted tokens are sent to the deployer’s wallet upon creation.

3.2 Simple Customizations

• Modify the name and symbol strings to whatever you want your token to be called.

• You can add features like burning, minting, or a blacklist, but beginners should stick to this minimal version first.

• For more advanced functionality (like automatic liquidity or rewards), you can explore libraries like OpenZeppelin, but a professional audit is highly recommended.

4. Deploying Your Contract to Anubis Chain with Remix IDE

Remix is the official, browser-based Ethereum IDE. No installation is needed.

4.1 Open Remix and Write Your Contract

Go to remix.ethereum.org. In the file explorer panel on the left, create a new file called MyToken.sol and paste the complete code from the previous step.

4.2 Compile the Contract

1. Click the "Solidity Compiler" icon on the left sidebar.

2. Select a compiler version matching your code (e.g., 0.8.x).

3. Click the "Compile MyToken.sol" button. A green checkmark confirms success.

4.3 Connect MetaMask and Deploy

1. Switch to the "Deploy & run transactions" panel.

2. Under "Environment," select "Injected Provider - MetaMask". Remix will prompt your wallet to connect.

3. Confirm in MetaMask. Absolutely make sure your MetaMask is switched to the Anubis Chain Mainnet network.

4. In the "Contract" dropdown, select MyToken - browser/MyToken.sol.

5. Next to the "Deploy" button, enter your initial supply—for example, 1000000 (which represents 1 million tokens factoring in the decimals).

6. Click "Deploy." MetaMask will show a transaction confirmation popup. Review the extremely low gas fee and confirm.

The deployment transaction will complete in about 3 seconds. Remix’s terminal will log the contract address. Copy and save this address—it is your token’s unique identifier.

4.4 Add the Token to Your MetaMask

Tokens don’t appear automatically; you must import them:

1. Open MetaMask, ensuring you are on the Anubis Chain network.

2. Click on "Assets" and then "Import tokens."

3. Paste the contract address. The Token Symbol and Token Decimal should auto-fill.

4. Click "Next" then "Import." Your entire token balance will now be visible.

5. Token Verification and Next Steps

5.1 Verify and Publish Your Source Code

Verifying your contract on the block explorer makes the code public and proves it’s trustworthy.

1. Go to https://explorer.anubis.network and search for your contract address.

2. Navigate to the "Contract" tab and click "Verify and Publish."

3. Match the compiler version, license type, and submit your source code exactly as you deployed it.

4. Once verified, anyone can read your code and interact with your token directly on the explorer.

5.2 Creating Liquidity (Optional)

If you want your token to be tradable, you need to create a liquidity pool on a decentralized exchange like AnubisSwap. This involves pairing some of your tokens with ANB (or another base asset). This step carries financial risk and requires a solid understanding of market mechanics before you proceed.

6. Frequently Asked Questions (FAQs)

1. What’s the real difference between Anubis Chain and Ethereum for a token creator?

The core differences are speed and cost. Deploying a token contract on Ethereum during a busy period can cost $50 or more, while on Anubis Chain, it's under $0.001 and confirms in 3 seconds. Because both are EVM-compatible, the Solidity code you learn is 100% transferable.

2. Do I need to know how to code? What if I don’t understand the contract?

You do not need any programming experience. With the standard ERC-20 contract provided, your only task is to change the name, symbol, and initial supply—nothing else. Follow the instructions exactly, and you’ll have a token. If you want more complex features later, that's the time to start learning Solidity basics.

3. How much ANB do I need for gas, and is there a free testnet faucet?

A standard ERC-20 deployment on mainnet costs a fraction of a cent, typically less than $0.001 worth of ANB. For the testnet, you can get free tokens from the official faucet at faucet.anubis.network. Usually, you can claim 1 test ANB daily, which is enough for dozens of deployments.

4. Can I send my new token to friends? What wallet do they need?

Absolutely. The recipient only needs a wallet that supports Anubis Chain (like MetaMask with the network added). You give them the token's contract address, they import it into their wallet as a custom token, and you can transfer the tokens exactly like you would with an ERC-20 token on Ethereum.

5. Can I change the token’s name or mint more after deployment?

With the basic contract in this guide, no. The name, symbol, and total supply are hardcoded and permanently fixed the moment you deploy. If you need functions like minting or burning, you must include that logic in the contract before deployment (using audited libraries like OpenZeppelin’s ERC20Burnable is the safest way).

6. Can my token get listed on a big exchange? What does it take?

Technically, yes. Any decentralized exchange that supports Anubis Chain can list your ERC-20 token permissionlessly. Getting listed on a centralized exchange like Coinbase or Binance is entirely different. It requires you to apply, and the project typically needs a strong use case, large community, legal opinion, and a professional code audit.

7. Are the token standards on Anubis Chain exactly the same? Can I launch an NFT?

They are identical. Anubis Chain fully supports ERC-20 (fungible tokens), ERC-721 (NFTs), and ERC-1155 (multi-token standard). Any Ethereum NFT contract can be deployed here without modification. The process is similar to this guide; you would just deploy an ERC-721 contract instead.

8. Is my token safe from hackers? How do I ensure security?

Your token’s security depends 100% on the smart contract code. The bare-bones contract in this tutorial has no administrative functions and a minimal attack surface, making it very low risk. If you copy a complex contract with minting, staking, or tax mechanics from an unverified source, the risks skyrocket. Always use battle-tested, audited code from trusted libraries, and ideally, get your own audit.

7. Summary

Anubis Chain combines full EVM compatibility, ultra-low gas fees, and high throughput, making it the perfect launchpad for your first token. By following this guide, you’ve learned:

• The key advantages of Anubis Chain with clear data comparisons.

• The complete workflow, from wallet setup and writing/modifying an ERC-20 contract to deploying it on-chain with Remix.

• Answers to common roadblocks and clear next steps for your project.

Whether you're creating a community points system, a governance token, or just want to learn how blockchain works, running through this process on Anubis Chain gives you a real, tangible on-chain experience for nearly zero cost. Now, it’s time to actually deploy a token and experience the magic of turning code into a digital asset.

Your Quick-Start Checklist:

1. Install MetaMask and add the Anubis Chain network.

2. Get a small amount of ANB from a faucet or exchange.

3. Deploy the standard ERC-20 contract using Remix.

4. Import the token into your wallet and try a transfer.

5. (Optional) Verify your source code on the explorer for full transparency.

Now go ahead and take your first step into on-chain token creation!